MXenes in Gas Sensing
Keywords:
MXene, gas-sensor, gas concentration, sensitivityAbstract
An extensive review of the history and current status of MXene-based gas sensors is presented here. The unusual electrical, optical, and mechanical features of MXenes, a novel family of two-dimensional transition metal carbides and nitrides, have garnered a lot of attention in recent years. These properties make MXenes highly promising materials for various applications, including gas sensing. This review examines various strategies used to enhance the performance of MXene-based gas sensors, including surface modification, hybridization with other materials, and device design. A detailed analysis of the sensing mechanism and the factors that influence the sensing performance is also presented. The authors also address the challenges and limitations MXene-based gas sensors face, including low stability and sensitivity, poor selectivity, and limited applicability to different gas types. They highlight the need for further research to overcome these limitations and enhance the sensing performance. The review provides valuable insights into the potential and limitations of MXene-based gas sensors and serves as a useful reference for researchers and engineers working in the field. This study is concluded by highlighting the future directions and opportunities for further development of MXene-based gas sensors.
References
. Li, Q., Y. Li, and W.J.C. Zeng, Preparation and application of 2D MXene-based gas sensors: A review. 2021. 9(8): p. 225.
. Hasan, M.M., M.M. Hossain, and H.K.J.J.o.M.C.A. Chowdhury, Two-dimensional MXene-based flexible nanostructures for functional nanodevices: a review. 2021. 9(6): p. 3231-3269.
. Shahzad, F., et al., 2D transition metal carbides (MXenes): applications as an electrically conducting material. 2020. 32(51): p. 2002159.
. Xin, M., et al., MXenes and their applications in wearable sensors. 2020. 8: p. 297.
. Alwarappan, S., et al., 2D metal carbides and nitrides (MXenes) for sensors and biosensors. 2022. 205: p. 113943.
. Di Tinno, A., et al., Sensitive detection of industrial pollutants using modified electrochemical platforms. 2022. 12(10): p. 1779.
. Cancelliere, R., et al., Biochar: a sustainable alternative in the development of electrochemical printed platforms. 2022. 10(8): p. 344.
. Zhang, H.-F., et al., Strategies and challenges for enhancing performance of MXene-based gas sensors: a review. 2022. 41(12): p. 3976-3999.
. Xu, W., et al., The metallic nature of two-dimensional transition-metal dichalcogenides and MXenes. 2021. 76(4): p. 100542.
. Kumar, S.J.S., Fluorine?Free MXenes: Recent Advances, Synthesis Strategies, and Mechanisms. 2024. 20(16): p. 2308225.
. Zhang, Y.Z., et al., MXene printing and patterned coating for device applications. 2020. 32(21): p. 1908486.
. Zheng, W., et al., Heterolayered SnO2/SnSe nanosheets for detection of NO2 at room temperature. 2022. 5(2): p. 2436-2444.
. Ahmed, B., et al., H 2 O 2 assisted room temperature oxidation of Ti 2 C MXene for Li-ion battery anodes. 2016. 8(14): p. 7580-7587.
. Naguib, M., et al., Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2, in MXenes. 2011, Jenny Stanford Publishing. p. 15-29.
. Kumar, S., et al., Effect of Ti 3 C 2 T x MXenes etched at elevated temperatures using concentrated acid on binder-free supercapacitors. 2020. 10(68): p. 41837-41845.
. Zhang, X., et al., A review on optoelectronic device applications of 2D transition metal carbides and nitrides. 2021. 200: p. 109452.
. He, T., et al., MXene/SnO2 heterojunction based chemical gas sensors. 2021. 329: p. 129275.
. Lee, E., et al., Room temperature gas sensing of two-dimensional titanium carbide (MXene). 2017. 9(42): p. 37184-37190.
. Anasori, B. and Û.G. Gogotsi, 2D metal carbides and nitrides (MXenes). Vol. 2549. 2019: Springer.
. Peng, C., et al., A hydrothermal etching route to synthesis of 2D MXene (Ti3C2, Nb2C): Enhanced exfoliation and improved adsorption performance. 2018. 44(15): p. 18886-18893.
. Ran, J., et al., Ti3C2 MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production. 2017. 8(1): p. 13907.
. Al-Dulaimi, N., et al., Sequential bottom-up and top-down processing for the synthesis of transition metal dichalcogenide nanosheets: the case of rhenium disulfide (ReS 2). 2016. 52(50): p. 7878-7881.
. Zang, X., et al., Enhancing capacitance performance of Ti 3 C 2 T x MXene as electrode materials of supercapacitor: from controlled preparation to composite structure construction. 2020. 12: p. 1-24.
. He, Z., et al., Two-dimensional TiVC solid-solution MXene as surface-enhanced Raman scattering substrate. 2022. 16(3): p. 4072-4083.
. Feng, W., et al., Ultrasonic assisted etching and delaminating of Ti3C2 Mxene. 2018. 44(6): p. 7084-7087.
. Le, T.A., et al., Porosity?engineering of MXene as a support material for a highly efficient electrocatalyst toward overall water splitting. 2020. 13(5): p. 945-955.
. Natu, V., et al., 2D Ti3C2Tz MXene synthesized by water-free etching of Ti3AlC2 in polar organic solvents. 2020. 6(3): p. 616-630.
. Fatima, M., et al., Experimental and computational analysis of MnO2@ V2C-MXene for enhanced energy storage. 2021. 11(7): p. 1707.
. Zhang, T., et al., Synthesis of two-dimensional Ti3C2Tx MXene using HCl+ LiF etchant: enhanced exfoliation and delamination. 2017. 695: p. 818-826.
. Wu, Y., et al., Few-layer MXenes delaminated via high-energy mechanical milling for enhanced sodium-ion batteries performance. 2017. 9(45): p. 39610-39617.
. Wang, Z., et al., Facile fabrication of flexible rGO/MXene hybrid fiber-like electrode with high volumetric capacitance. 2020. 448: p. 227398.
. Zhao, W.-N., et al., A high-performance trace level acetone sensor using an indispensable V 4 C 3 T x MXene. 2020. 10(3): p. 1261-1270.
. Dong, X., et al. A Novel Memory Mechanism for Postponing the Drift of Chemical Gas Sensors. in 2021 IEEE 11th International Conference on Electronics Information and Emergency Communication (ICEIEC) 2021 IEEE 11th International Conference on Electronics Information and Emergency Communication (ICEIEC). 2021. IEEE.
. Sun, B., et al., Co 3 O 4@ PEI/Ti 3 C 2 T x MXene nanocomposites for a highly sensitive NO x gas sensor with a low detection limit. 2021. 9(10): p. 6335-6344.
. Naguib, M., et al., Two-dimensional transition metal carbides. 2012. 6(2): p. 1322-1331.
. Chen, W.Y., et al., Surface functionalization of Ti3C2T x MXene with highly reliable superhydrophobic protection for volatile organic compounds sensing. 2020. 14(9): p. 11490-11501.
. Pei, Y., et al., Ti3C2TX MXene for sensing applications: recent progress, design principles, and future perspectives. 2021. 15(3): p. 3996-4017.
. Guo, L., et al., Extremely high thermal conductivity of carbon fiber/epoxy with synergistic effect of MXenes by freeze-drying. 2020. 19: p. 134-141.
. Yang, Z., et al., Flexible resistive NO2 gas sensor of three-dimensional crumpled MXene Ti3C2Tx/ZnO spheres for room temperature application. 2021. 326: p. 128828.
. Wang, S., et al., PANI nanofibers-supported Nb2CTx nanosheets-enabled selective NH3 detection driven by TENG at room temperature. 2021. 327: p. 128923.
. Wang, X., et al., In situ polymerized polyaniline/MXene (V2C) as building blocks of supercapacitor and ammonia sensor self-powered by electromagnetic-triboelectric hybrid generator. 2021. 88: p. 106242.
. Hosseini-Shokouh, S.H., et al., Highly Selective H2S Gas Sensor Based on Ti3C2T x MXene–Organic Composites. 2023. 15(5): p. 7063-7073.
. Sarikurt, S., et al., The influence of surface functionalization on thermal transport and thermoelectric properties of MXene monolayers. 2018. 10(18): p. 8859-8868.
. Liu, J., et al., H2S detection sensing characteristic of CuO/SnO2 sensor. 2003. 3(5): p. 110-118.
. Khaledialidusti, R., A.K. Mishra, and A.J.J.o.M.C.C. Barnoush, Atomic defects in monolayer ordered double transition metal carbide (Mo 2 TiC 2 T x) MXene and CO 2 adsorption. 2020. 8(14): p. 4771-4779.
. Elemike, E.E., et al., The future of energy materials: A case of MXenes-carbon dots nanocomposites. 2022. 50: p. 104711.
. Yu, Z., et al., Fabrication of ZnO/Carbon quantum dots composite sensor for detecting NO gas. 2020. 20(17): p. 4961.
. Li, X., et al., Intriguing electronic properties of two-dimensional MoS2/TM2CO2 (TM= Ti, Zr, or Hf) hetero-bilayers: type-II semiconductors with tunable band gaps. 2015. 26(13): p. 135703.
. Khaledialidusti, R., B. Anasori, and A.J.P.C.C.P. Barnoush, Temperature-dependent mechanical properties of Ti n+ 1 C n O 2 (n= 1, 2) MXene monolayers: A first-principles study. 2020. 22(6): p. 3414-3424.
. He, T., et al., Endohedral metallofullerenes (M@ C60) as efficient catalysts for highly active hydrogen evolution reaction. 2017. 354: p. 231-235.
. Sinha, A., et al., MXene: An emerging material for sensing and biosensing. 2018. 105: p. 424-435.
. Cao, F., et al., Recent advances in oxidation stable chemistry of 2D MXenes. 2022. 34(13): p. 2107554.
. Shein, I. and A.J.C.M.S. Ivanovskii, Graphene-like titanium carbides and nitrides Tin+ 1Cn, Tin+ 1Nn (n= 1, 2, and 3) from de-intercalated MAX phases: First-principles probing of their structural, electronic properties and relative stability. 2012. 65: p. 104-114.
. Yorulmaz, U., et al., Vibrational and mechanical properties of single layer MXene structures: a first-principles investigation. 2016. 27(33): p. 335702.
. Cheng, R., et al., MXenes induce epitaxial growth of size-controlled noble nanometals: A case study for surface enhanced Raman scattering (SERS). 2020. 40: p. 119-127.
. Zhao, C., M. Zhou, and H.J.A.S.S. Yu, Interfacial combination of Ti3C2Tx MXene with waterborne epoxy anticorrosive coating. 2022. 572: p. 150894.
. Singh, B., et al., Hydrothermal-assisted synthesis and stability of multifunctional MXene nanobipyramids: structural, chemical, and optical evolution. 2021. 13(2): p. 3011-3023.
. Hu, T., et al., Chemical origin of termination-functionalized MXenes: Ti3C2 T 2 as a case study. 2017. 121(35): p. 19254-19261.
. Meshkian, R., et al., Theoretical stability and materials synthesis of a chemically ordered MAX phase, Mo2ScAlC2, and its two-dimensional derivate Mo2ScC2 MXene. 2017. 125: p. 476-480.
. Zhang, H., et al., Designing flexible 2D transition metal carbides with strain-controllable lithium storage. 2017. 114(52): p. E11082-E11091.
. Plummer, G., et al., Nanoindentation of monolayer Tin+ 1CnTx MXenes via atomistic simulations: The role of composition and defects on strength. 2019. 157: p. 168-174.
. Pang, J., et al., Applications of 2D MXenes in energy conversion and storage systems. 2019. 48(1): p. 72-133.
. Li, Y., et al., In-situ SEM compression of accordion-like multilayer MXenes. 2020. 41: p. 101054.
. Wang, J., et al., Mechanochemistry-induced biaxial compressive strain engineering in MXenes for boosting lithium storage kinetics. 2021. 87: p. 106053.
. Zhang, X. and A.J.N. Beyer, Mechanics of free-standing inorganic and molecular 2D materials. 2021. 13(3): p. 1443-1484.
. Verma, A., et al., A review of composite conducting polymer-based sensors for detection of industrial waste gases. 2023. 5: p. 100143.
. Aldridge, B.G. and G.A. Stringer, Bridge Circuits: One Topic in the Modular Course in Electronics Instrumentation. 1978.
. Wang, Y., et al., H2S sensing characteristics of Pt-doped ?-Fe2O3 thick film sensors. 2007. 125(1): p. 79-84.
. Gorbova, E., et al., Fundamentals and principles of solid-state electrochemical sensors for high temperature gas detection. 2021. 12(1): p. 1.
. Park, C.-O., et al., Solid-state electrochemical gas sensors. 2009. 15: p. 261-284.
. Bakker, E. and M.J.A.c. Telting-Diaz, Electrochemical sensors. 2002. 74(12): p. 2781-2800.
. Inzelt, G., Electrode potentials, in Handbook of reference electrodes. 2013, Springer. p. 1-24.
. Markovi?, N., et al., Electrooxidation of CO and H2/CO mixtures on Pt (111) in acid solutions. 1999. 103(3): p. 487-495.
. Gridchin, V.A., et al. A new piezoresistive pressure sensor on the base of polysilicon thin films with dielectric insulation. in 8th International Forum on Strategic Technology 2013, IFOST 2013-Proceedings. 2013.
. Latif, U. and F.L.J.S. Dickert, Graphene hybrid materials in gas sensing applications. 2015. 15(12): p. 30504-30524.
. Wang, Y., et al., “Visualization” Gas—Gas Sensors Based on High Performance Novel MXenes Materials. 2024. 20(2): p. 2305250.
. Pazniak, H., et al., Partially oxidized Ti3C2T x MXenes for fast and selective detection of organic vapors at part-per-million concentrations. 2020. 3(4): p. 3195-3204.
. Yuan, W., et al., A flexible VOCs sensor based on a 3D Mxene framework with a high sensing performance. 2018. 6(37): p. 18116-18124.
. Li, N., et al., High-performance humidity sensor based on urchin-like composite of Ti3C2 MXene-derived TiO2 nanowires. 2019. 11(41): p. 38116-38125.
. Radhakrishnan, S., M. Mathew, and C.S.J.M.A. Rout, Microfluidic sensors based on two-dimensional materials for chemical and biological assessments. 2022. 3(4): p. 1874-1904.
. Wang, Y., et al., Titanium carbide MXenes mediated in situ reduction allows label-free and visualized nanoplasmonic sensing of silver ions. 2020. 92(6): p. 4623-4629.
. Shao, H., 2D Ti3C2Tx MXenes for electrochemical energy storage. 2020, Université Paul Sabatier-Toulouse III.
. Li, N., et al., A fully inkjet-printed transparent humidity sensor based on a Ti 3 C 2/Ag hybrid for touchless sensing of finger motion. 2019. 11(44): p. 21522-21531.
. Wei, H., G. Li, and J. Li, Biomedical Nanozymes: From Diagnostics to Therapeutics. 2023: Springer Nature.
. Koh, H.-J., et al., Enhanced selectivity of MXene gas sensors through metal ion intercalation: in situ X-ray diffraction study. 2019. 4(5): p. 1365-1372.
. Seyedin, S., et al., MXene composite and coaxial fibers with high stretchability and conductivity for wearable strain sensing textiles. 2020. 30(12): p. 1910504.
. Pu, J.-H., et al., Multilayer structured AgNW/WPU-MXene fiber strain sensors with ultrahigh sensitivity and a wide operating range for wearable monitoring and healthcare. 2019. 7(26): p. 15913-15923.
. Li, H., Z.J.A.a.m. Du, and interfaces, Preparation of a highly sensitive and stretchable strain sensor of MXene/silver nanocomposite-based yarn and wearable applications. 2019. 11(49): p. 45930-45938.
. Guo, Y., et al., A wearable transient pressure sensor made with MXene nanosheets for sensitive broad-range human–machine interfacing. 2019. 19(2): p. 1143-1150.
. Yang, Y., et al., Ti3C2Tx MXene-graphene composite films for wearable strain sensors featured with high sensitivity and large range of linear response. 2019. 66: p. 104134.
. Peng, Y., et al., Ultrasensitive Soft Sensor from Anisotropic Conductive Biphasic Liquid Metal?Polymer Gels. 2024. 36(8): p. 2305707.
. Chen, L., et al., High-tactile sensitivity of piezoresistive sensors with a micro-crack structure induced by thin film tension. 2019. 40(9): p. 1519-1521.
. Yang, Y., et al., Strain sensors with a high sensitivity and a wide sensing range based on a Ti3C2Tx (MXene) nanoparticle–nanosheet hybrid network. 2019. 29(14): p. 1807882.
. Zhang, X., et al., Flexible MXene-decorated fabric with interwoven conductive networks for integrated joule heating, electromagnetic interference shielding, and strain sensing performances. 2020. 12(12): p. 14459-14467.
. Zhang, H., et al., Wearable pressure sensor array with layer-by-layer assembled MXene nanosheets/Ag nanoflowers for motion monitoring and human–machine interfaces. 2022. 14(43): p. 48907-48916.
. Li, T., et al., A flexible pressure sensor based on an MXene–textile network structure. 2019. 7(4): p. 1022-1027.
. Han, S., et al., Tunable Fabrication of Conductive Ti3C2T x MXenes via Inflating a Polyurethane Balloon for Acute Force Sensing. 2020. 36(5): p. 1298-1304.
. Gao, Y., et al., Microchannel?confined MXene based flexible piezoresistive multifunctional micro?force sensor. 2020. 30(11): p. 1909603.
. Zhang, Y., et al., Heterogeneous, 3D architecturing of 2D titanium carbide (MXene) for microdroplet manipulation and voice recognition. 2020. 12(7): p. 8392-8402.
. Gu, J., et al., Extremely Robust and Multifunctional Nanocomposite Fibers for Strain?Unperturbed Textile Electronics. 2023. 35(15): p. 2209527.
. Han, S., et al., Smart MXene-based Bioelectronic Devices as Wearable Self-powered Health Monitor for Sensing Human Physiological Signals. 2023.
. Dai, T., et al., Bioinspired Dynamic Matrix Based on Developable Structure of MXene?Cellulose Nanofibers (CNF) Soft Actuators. 2024: p. 2400459.
. Zhao, X.-F., et al., A skin-like sensor for intelligent Braille recognition. 2020. 68: p. 104346.
. Chuang, H., et al., Tear Diagnosis for Diabetic Retinopathy Using an Optoelectrokinetically Driven Bead-based Immunosensor, 20th International Conferenece on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII. 2019.
. Yang, Y., et al., A High?Sensitive Rubber?Based Sensor with Integrated Strain and Humidity Responses Enabled by Bionic Gradient Structure. 2024: p. 2400789.
. Zhang, Q., et al., A Laminated Gravity?Driven Liquid Metal?Doped Hydrogel of Unparalleled Toughness and Conductivity. 2023: p. 2308113.
. Brett, C. and A.M.O.J. Brett, Electrochemistry: principles, methods, and applications. 1993.
. Vidakovi?, T., M. Christov, and K.J.E.A. Sundmacher, The use of CO stripping for in situ fuel cell catalyst characterization. 2007. 52(18): p. 5606-5613.
. Yu, X.-f., et al., Monolayer Ti2CO2: a promising candidate for NH3 sensor or capturer with high sensitivity and selectivity. 2015. 7(24): p. 13707-13713.
. Zhang, Q., et al., High concentration of Ti3C2T x MXene in organic solvent. 2021. 15(3): p. 5249-5262.
. Kumar, R.J.M.C.P., R. kashyap, R. Kumar, D. Kumar, SK Sharma and M. Kumar. 2020. 240: p. 121922.
. Gouveia, J.D., et al., First-principles calculations on the adsorption behavior of amino acids on a titanium carbide MXene. 2020. 3(9): p. 5913-5921.
. Liu, N., et al., Tuning Schottky barriers for monolayer GaSe FETs by exploiting a weak Fermi level pinning effect. 2018. 20(33): p. 21732-21738.
. Xiao, B., et al., MXenes: Reusable materials for NH3 sensor or capturer by controlling the charge injection. 2016. 235: p. 103-109.
. Wu, M., et al., V2CT x and Ti3C2T x MXenes nanosheets for gas sensing. 2021. 4(6): p. 6257-6268.
. Sun, S., et al., W18O49/Ti3C2Tx Mxene nanocomposites for highly sensitive acetone gas sensor with low detection limit. 2020. 304: p. 127274.
. Xia, Q., et al., MXene-based chemical gas sensors: Recent developments and challenges. 2023. 131: p. 109557.
. Kim, S., et al., Metallic Ti3C2Tx MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio. ACS Nano 12: 986-993. 2018.
. Schieweck, A., et al., Smart homes and the control of indoor air quality. 2018. 94: p. 705-718.
. Umar, A., et al., Enhanced NO2 gas sensor device based on supramolecularly assembled polyaniline/silver oxide/graphene oxide composites. 2021. 47(18): p. 25696-25707.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 International Journal of Applied Sciences: Current and Future Research Trends
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who submit papers with this journal agree to the following terms.
