Numerical Simulation of Galvanic Corrosion and High Temperature Corrosion During Hot Metal Stamping Process

Muchineripi Wilfred Mukora; Micheal Alexander Petrov

Authors

Muchineripi Wilfred Mukora Department "Material forming and additive technologies" Moscow Polytechnic University, st. Avtozavodskaya, 16, 115280, Moscow
Micheal Alexander Petrov Department "Material forming and additive technologies" Moscow Polytechnic University, st. Avtozavodskaya, 16, 115280, Moscow

Keywords:

corrosion, numerical simulation, high temperature corrosion, oxide scaling, Comsol Multiphysics, galvanic corrosion, hot metal stamping

Abstract

The article presents a comparative analysis of the simulation results with the results of experiments on corrosion processes occurring at elevated temperatures (high-temperature corrosion) and in conditions of combined corrosion (chemical, in water, and electrochemical, galvanic steam). Good relation of the results at the level of the expected products of chemical interaction is obtained.

References

. Z. Zhuzhu, M. Haitao, C. Yueliang, W. Xingjun, Z. Shenglin, and H. Wenlin, "Dynamic fracture toughness and damage mechanism of 38CrMoAl steel under salt spray corrosion," Theoretical and Applied Fracture Mechanics, vol. 122, pp. 6-12, 2022.

. M. Mohammad, A. Wahaaj, L. Muzi, C. Carlos, and L. Javier, "Simulation of corrosion and mechanical degradation of additively manufactured Mg scaffolds in simulated body fluid," Journal of the Mechanical Behavior of Biomedical Materials, vol. 125, pp. 2-9, 2022.

. Y. Hao, P. Xianbo, L. Zhanghua, Z. Qiang, S. Taihe, W. Jinlong, and Z. Zhaoyang, "Experimental and numerical simulation of fatigue corrosion behavior of V150 high-strength drill pipe in air and H2S-dilling mud environment," Journal of Natural Gas Science and Engineering, vol. 110, pp. 2-8, 2022.

. S. Hänninen, E. Lähderanta, M. Zeleny, and T. Vuorinen, "Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations," Journal of Advanced Joining Processes, vol. 1, pp. 4-6, 2022.

. S. Sheikh, Z. M. Abu, and M. Hasan, "Experimental and numerical simulation of corrosion induced expansive pressure on concrete cover," Engineering Solid Mechanics, vol. 7, pp. 3-10, 2019.

. Y. Liu, S. Liu, and W. Ma, "Numerical Simulation of CO2 Electrochemical Corrosion of Coiled Tubing in High-Temperature and High-Pressure Gas Wells," Chinese Journal of High Pressure Physics, vol. 34, pp. 4-8, 2020.

. K. B. Deshpande, "Numerical modeling of micro-galvanic corrosion," Electrochimica Acta, vol. 56, pp. 1737–1745, 2011.

. J. X. Jia, A. Atrems, G. Song, and T. H. Muster, "Simulation of galvanic corrosion of magnesium coupled to a steel fastener in NaCl solution," Materials and Corrosion., vol. 56(7), pp. 468-474, 2005.

. COMSOL Multiphysics [Online]. Available: www.comsol.com

. J. Ågren , "Diffusion in metal oxides and high temperature oxidation of metals," Dept. of Matls.Sci.& Engg., Royal Institute of Technology, Stockholm, Sweden, 2012.

. J. Chen , "Hand Book of Steel Making," Beijing: Metallurgical Industry Press, 1984.

. M. Krzyzanowski and J. H. Beynon, "Journal of Materials Processing Technology," vol. 125-126, pp. 398-404, 2002.

. M. Krzyzanowski and J. H. Beynon, "Modelling Simul.Mater.Sci.Eng." vol. 8, pp. 927-945, 2000.

. G.V Samsonov., "Physical and chemical properties of oxides," Moscow: Metallurgy.,1987.

. A.G Ryabukhin., "Normal and inverted spinels," Proceedings of the conference "Modern Problems of electrometallurgy," Chelyabinsk.,2001.

. N.P Zhuk., "Corrosion and protection of metals," Moscow: Metallurgy.,1968.

Numerical Simulation of Galvanic Corrosion and High Temperature Corrosion During Hot Metal Stamping Process

Authors

Keywords:

Abstract

References

Downloads

Published

How to Cite

Issue

Section

License

Developed By

Make a Submission

Information

Browse

Current Issue